xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Traffic Segmentation
Traffic segmentation is used to limit traffic flow from a single port to a group of ports on either a single switch or a group of ports
on another switch in a switch stack. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is
more restrictive. It provides a method of directing traffic that does not increase the overhead of the Master switch CPU.
To view the
Traffic Segmentation
window, click
Security
>
Traffic Segmentation
,
as shown below.
Figure 11- 52. Current Traffic Segmentation Table window
This window allows you to view which port on a given switch will be allowed to forward packets to other ports on that switch.
Select the unit you wish to configure and a port number from the drop down menu and click
View
to
display the forwarding ports.
To configure new forwarding ports for a particular port, select a port from the drop down menu and click
Setup
. The window
shown below will appear.
Figure 11- 53. Setup Forwarding Ports window
The user may set the following parameters:
321
