xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Name
Interface on the network.
Interface Name - An IP interface name that has been enabled for VRRP. This entry must
have been previously set in the IP Interfaces table.
Virtual IP Address
The IP address of the Virtual router configured on the Switch.
Master IP Address
Displays the IP address of the Master router for the VRRP function.
Virtual Router State
Displays the current state of the Virtual Router on the Switch. Possible states include
Initialize, Master, and Backup
.
State
Displays the VRRP state of the corresponding VRRP entry.
Display
Click the
button to display the settings for this particular VRRP entry.
Delete
Click the
to delete this VRRP entry.
Click the
Add
button to display the following window to configure a VRRP interface.
Figure 8- 72. VRRP Virtual Router Settings – Add window
Or, the user may click the hyperlinked Interface Name to view the same window:
The following parameters may be set to configure an existing or new VRRP interface.
Parameter
Description
Interface Name
Enter the name of a previously configured IP interface for which to create a VRRP entry.
This IP interface must be assigned to a VLAN on the Switch.
VRID (1-255)
Enter a value between
1
and
255
to uniquely identify this VRRP group on the Switch. All
routers participating in this group must be assigned the same VRID value. This value MUST
be different from other VRRP groups set on the Switch.
IP Address
Enter the IP address that will be assigned to the VRRP router. This IP address is also the
default gateway that will be statically assigned to end hosts and must be set for all routers
that participate in this group.
State
Used to enable and disable the VRRP IP interface on the Switch.
216
