D-Link xStack DGS-3427, User Manual

Page: 69 / 246

xStack DGS-3400 Series Fast Ethernet Switch
SNMP User Table
The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, located in the Administration folder, click on the SNMP User Table link. This will open
the SNMP User Table window, as shown below.
Figure 6- 32. SNMP User Table window
To delete an existing SNMP User Table entry, click the X below the Delete heading corresponding to the entry you wish to
delete.
To display the detailed entry for a given user, click on the View button. This will open the SNMP User Table Display
window, as shown below.
Figure 6- 33. SNMP User Table Display
The following parameters are displayed:
Parameter Description
User Name An alphanumeric string of up to 32 characters. This is used to identify the
SNMP users.
Group Name This name is used to specify the SNMP group created can request SNMP
messages.
SNMP Version
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
Auth-Protocol None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES
(DES-56) standard.
58