D-Link xStack DGS-3427, User Manual

Page: 120 / 246

xStack DGS-3400 Series Fast Ethernet Switch
Forwarding & Filtering
Unicast Forwarding
Open the Forwarding & Filtering folder in the Layer 2 Features menu and click on the Unicast Forwarding link.
Figure 7- 29. Setup Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify :
Parameter Description
VLAN ID (VID) The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
MAC Address The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Port Allows the selection of the port number on which the MAC address entered
above resides.
Click Add to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding X under the Delete heading.
Static Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding
Filtering folder and click on the Multicast Forwarding link to see the entry screen below:
Figure 7- 30. Static Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast
forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
109