D-Link xStack DGS-3427 User Manual Download Page 230

Page: 230 / 246

219

Technische Unterstützung

Aktualisierte Versionen von Software und Benutzerhandbuch finden Sie

auf der Website von D-Link.

D-Link bietet kostenfreie technische Unterstützung für Kunden innerhalb

Deutschlands, Österreichs, der Schweiz und Osteuropas.

Unsere Kunden können technische Unterstützung über unsere Website,

per E-Mail oder telefonisch anfordern.

Web: http://www.dlink.de

E-Mail: [email protected]

Telefon: +49 (1805)2787

0,12€/Min aus dem Festnetz der Deutschen Telekom.

Telefonische technische Unterstützung erhalten Sie Montags bis Freitags

von 09.00 bis 17.30 Uhr.

Unterstützung erhalten Sie auch bei der Premiumhotline für D-Link

Produkte unter der Rufnummer 09001-475767

Montag bis Freitag von 6-22 Uhr und am Wochenende von 11-18 Uhr.

1,75€/Min aus dem Festnetz der Deutschen Telekom.

Summary of Contents for xStack DGS-3427






















































































































































































































































Search results

Summary of Contents for xStack DGS-3427

Reviews:

Related manuals for xStack DGS-3427

Brands by name

Popular brands

D-Link xStack DGS-3427, User Manual

Search results

Summary of Contents for xStack DGS-3427

Reviews:

Related manuals for xStack DGS-3427

Brands by name

Popular brands