xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
577
upload attack_log_toTFTP
Purpose
Used to upload the attack log on a unit.
Syntax
upload attack_log_toTFTP [<ipaddr> | <ipv6addr> |<domain_name 255>] {dest_file}
<path_filename 64> {unit <unit_id 1-12>}
Description
This command is used to upload the attack log on a unit.
Parameters
ipaddr
- The IP address of the TFTP server.
ipv6addr
- The IPV6 address of the TFTP server.
domain_name
- The domain name of the TFTP server.
dest_file
- Used to identify the parameter “path_filename”.
path_filename
- Specifies the path name on the TFTP server to hold the attack log.
unit
- The attack log messages on the specified unit will be uploaded to the TFTP server. If it
is not specified, it refers to the master unit.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To upload the master’s dangerous log:
DGS-3450:admin# upload attack_log 10.90.90.1 dest_file C:\alert.txt
Command: upload attack_log 10.90.90.1 dest_file C:\alert.txt
Success.
DGS-3450:admin#