xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
265
DGS-3450:admin# config double_vlan RG delete 1:4-1:8
Command: config double_vlan RG delete 1:4-1:8
Success.
DGS-3450:admin#
show double_vlan
Purpose
Used to display the Double VLAN settings on the Switch.
Syntax
show double_vlan {<vlan_name>}
Description
This command will display the current double VLAN parameters configured on the Switch.
Parameters
vlan_name
−
Enter the name of a previously created VLAN for which to display the settings.
Restrictions
None.
Example usage:
To display parameters for the Double VLAN “RG”:
DGS-3450:admin# show double_vlan RG
Command: show double_vlan RG
Global Double VLAN : Enabled
====================================================
SPVID : 2
VLAN Name : RG
TPID : 0x9100
Uplink Ports :
Access Ports : 1:4-1:8
Unknow Ports :
----------------------------------------------------
Total Entries : 1
DGS-3450:admin#
enable pvid auto_assign
Purpose
Used to enable auto assignment of PVID.
Syntax
enable pvid auto_assign
Description
If “Auto-assign PVID” is enabled, PVID will be possibly changed by PVID or VLAN
configuration. When a user configures a port to VLAN
X
’s untagged membership, this
port’s PVID will be updated with VLAN X. In the form of VLAN list command, PVID is
updated with the last item of the VLAN list. When a user removes a port from the
untagged membership of the PVID’s VLAN, the port’s PVID will be assigned with
“default VLAN”. The default setting is enabled.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the auto-assign PVID:
