
xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
375
config lldp tx_delay
Purpose
Used to change the minimum time (delay-interval) LLDP ports will delay in advertising
successive LLDP advertisements due to a change in LLDP MIB content. The tx_delay
defines the minimum interval between sending of LLDP messages due to constantly change
of MIB content.
Syntax
config lldp tx_delay < sec 1–8192 >
Description
The LLDP message_tx_interval (transmit interval) must be greater than or equal to (4 x
tx_delay interval).
Parameters
tx_delay
– The range is from
1
second to
8192
seconds. The default setting is
2
seconds.
NOTE:
txDelay should be less than or equal to 0.25 * msgTxInterval
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the delay interval:
DGS-3450:admin# config lldp tx_delay 7
Command: config lldp tx_delay 7
Success.
DGS-3450:admin#
config lldp reinit_delay
Purpose
Change the minimum time of the reinitialization delay interval.
Syntax
config lldp reinit_delay <sec 1 - 10>
Description
A re-enabled LLDP port will wait for reinit_delay after last disable command before
reinitializing.
Parameters
reinit_delay
– The range is from
1
second to
10
seconds. The default setting is
2
seconds.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To changes the re-initialization delay interval to five seconds:
DGS-3450:admin# config lldp reinit_delay 5
Command: config lldp reinit_delay 5
Success.
DGS-3450:admin#