manualshive.com logo in svg

D-Link xStack DGS-3400 Series, User Manual

The D-Link xStack DGS-3400 Series is a high-performance network switch designed to meet the growing demands of businesses. With advanced features and exceptional reliability, this product ensures seamless connectivity. To familiarize yourself with its functionalities, simply download the free Reference Manual available at manualshive.com.

Share
Download
background image

 

Table of Contents 

 

Intended Readers............................................................................................................................................................................ x

 

Typographical Conventions ............................................................................................................................................................................x

 

Notes, Notices, and Cautions ........................................................................................................................................................ xi

 

Safety Instructions........................................................................................................................................................................ xii

 

Safety Cautions ............................................................................................................................................................................................ xii

 

General Precautions for Rack-Mountable Products .................................................................................................................................... xiii

 

Lithium Battery Precaution.....................................................................................................................................................................xiv

 

Protecting Against Electrostatic Discharge ..................................................................................................................................................xiv

 

Introduction......................................................................................................................................................1

 

Switch Description.....................................................................................................................................................................................1

 

Features...........................................................................................................................................................................................................2

 

Ports ................................................................................................................................................................................................................3

 

Front-Panel Components ...........................................................................................................................................................................4

 

LED Indicators................................................................................................................................................................................................5

 

Rear Panel Description ..............................................................................................................................................................................7

 

Side Panel Description...............................................................................................................................................................................8

 

Installation........................................................................................................................................................9

 

Package Contents.......................................................................................................................................................................................9

 

Installation Guidelines ...............................................................................................................................................................................9

 

Installing the Switch without the Rack ....................................................................................................................................................10

 

Installing the Switch in a Rack ................................................................................................................................................................10

 

Mounting the Switch in a Standard 19" Rack ..........................................................................................................................................11

 

Power On ......................................................................................................................................................................................................11

 

Power Failure...........................................................................................................................................................................................11

 

Installing the SFP ports............................................................................................................................................................................12

 

The Optional Module ....................................................................................................................................................................................13

 

Installing the Module...............................................................................................................................................................................14

 

External Redundant Power System ...............................................................................................................................................................15

 

Connecting the Switch ...................................................................................................................................17

 

Switch to End Node .................................................................................................................................................................................17

 

Switch to Switch ......................................................................................................................................................................................17

 

Connecting To Network Backbone or Server ...............................................................................................................................................18

 

Introduction to Switch Management ...........................................................................................................19

 

Management Options...............................................................................................................................................................................19

 

Connecting the Console Port (RS-232 DCE)...........................................................................................................................................20

 

Managing the Switch for the First Time ..................................................................................................................................................21

 

Password Protection.................................................................................................................................................................................22

 

IP Address Assignment............................................................................................................................................................................25

 

Web-based Switch Configuration.................................................................................................................27

 

Introduction.................................................................................................................................................................................. 27

 

Logging in to the Web Manager ...................................................................................................................................................................27

 

    

Summary of Contents for xStack DGS-3400 Series







































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DGS-3400 Series

GE SecoGear User Manual preview
SecoGear
Brand: GE Pages: 36
GE Power Break Installation Instructions Manual preview
Power Break
Brand: GE Pages: 8
Qlogic SANbox 5802V Installation Manual preview
SANbox 5802V
Brand: Qlogic Pages: 124
Qlogic SANbox 5800V Series User Manual preview
SANbox 5800V Series
Brand: Qlogic Pages: 158
Qlogic SANbox 5602 User Manual preview
SANbox 5602
Brand: Qlogic Pages: 324
Qlogic SANbox 5600 Series Quick Start Manual preview
SANbox 5600 Series
Brand: Qlogic Pages: 8
Qlogic SANbox 5600 Series Supplementary Manual preview
SANbox 5600 Series
Brand: Qlogic Pages: 10
Qlogic SANbox 5200 Series Supplementary Manual preview
SANbox 5200 Series
Brand: Qlogic Pages: 2
Qlogic SANbox 3810 Installation Manual preview
SANbox 3810
Brand: Qlogic Pages: 92
Qlogic SANbox 3810 User Manual preview
SANbox 3810
Brand: Qlogic Pages: 142
Qlogic SANbox 3050 Specifications preview
SANbox 3050
Brand: Qlogic Pages: 2
Qlogic SANbox 1400 Series Specifications preview
SANbox 1400 Series
Brand: Qlogic Pages: 2
Qlogic QLogic Fibre Channel Switch Quick Start Manual preview
QLogic Fibre Channel Switch
Brand: Qlogic Pages: 8
Qlogic SANbox 5000 Series Interface Manual preview
SANbox 5000 Series
Brand: Qlogic Pages: 350
Qlogic SANbox 5000 Series Installation Manual preview
SANbox 5000 Series
Brand: Qlogic Pages: 130
Qlogic QLogic 12000 Series Reference Manual preview
QLogic 12000 Series
Brand: Qlogic Pages: 144
Eaton RMQ-Titan M30 Series Instruction Leaflet preview
RMQ-Titan M30 Series
Brand: Eaton Pages: 4
Amped Wireless APA2600M Installation And Configuration Manual preview
APA2600M
Brand: Amped Wireless Pages: 22

Brands by name

Popular brands

Load more brands