D-Link xStack DGS-3400 Series, User Manual

Page: 16 / 326

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Features
The list of features below highlights the significant features of the xStack DGS-3400 Series.
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3z compliant
IEEE 802.3x Flow Control in full-duplex compliant
IEEE 802.3u compliant
IEEE 802.3ab compliant
IEEE 802.3ae compliant (for optional XFP module)
IEEE 802.1p Priority Queues
IEEE 802.3ad Link Aggregation Control Protocol support.
IEEE 802.1X Port-based and MAC-based Access Control
IEEE 802.1Q VLAN
IEEE 802.1D Spanning Tree, IEEE 802.1W Rapid Spanning Tree and IEEE 802.1s Multiple Spanning Tree support
IEEE 802.3af Power-over-Ethernet support for the DGS-3426P
Stacking support in either Duplex-Ring or Duplex-Chain topology
Access Control List (ACL) support
IP Multinetting support
Protocol VLAN support
Single IP Management support
Access Authentication Control utilizing TACACS, XTACACS, and RADIUS protocols
Dual Image Firmware
Simple Network Time Protocol support
MAC Notification support
System and Port Utilization support
System Log Support
High performance switching engine performs forwarding and filtering at full wire speed up to 128Gbps.
Full- and half-duplex for all gigabit ports. Full duplex allows the switch port to simultaneously transmit and receive data. It
only works with connections to full-duplex-capable end stations and switches. Connections to a hub must take place at half-
duplex.
Support broadcast storm filtering
Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
Supports by-port Egress/Ingress rate control
Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
Support port-based enable and disable
Address table: Supports up to 8K MAC addresses per device
Supports a packet buffer of up to 3 Mbits
Port Trunking with flexible load distribution and fail-over function
IGMP Snooping support
MLD Snooping support (MLD v1 and v2)
SNMP support
Secure Sockets Layer (SSL) and Secure Shell (SSH) support