manualshive.com logo in svg

D-Link xStack DES-3800 Series, User Manual

The D-Link xStack DES-3800 Series is a versatile network switch designed to meet the demands of modern businesses. To ensure easy setup and seamless operation, we provide a comprehensive User Manual that can be downloaded for free from manualshive.com. This manual offers step-by-step instructions and valuable insights for optimizing the performance of your network infrastructure.

Share
Download
background image

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch 

SNMP User Table  

The 

SNMP User Table 

displays all of the SNMP User's currently configured on the Switch. 

In the 

SNMP Manager

 folder, located in the 

Administration

 folder, click on the 

SNMP User Table

 link.  This will open the 

SNMP User Table 

window, as shown below. 

 

Figure 6- 22. SNMP User Table window 

To delete an existing 

SNMP User Table

 entry, click the 

 below the Delete heading corresponding to the entry you wish to 

delete. 

To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the 

SNMP User Table Display

 

window, as shown below. 

 

Figure 6- 23. SNMP User Table Display window 

The following parameters are displayed: 

Parameter                       Description 

User Name 

An alphanumeric string of up to 32 characters. This is used to identify the SNMP users. 

Group Name 

This name is used to specify the SNMP group created can request SNMP messages. 

SNMP Version 

V1

 - Indicates that SNMP version 1 is in use.  

V2 

- Indicates that SNMP version 2 is in use. 

V3 

- Indicates that SNMP version 3 is in use. 

Auth-Protocol 

None

 - Indicates that no authorization protocol is in use. 

MD5

 - Indicates that the HMAC-MD5-96 authentication level will be used. 

SHA

 - Indicates that the HMAC-SHA authentication protocol will be used.

 

Priv-Protocol 

None 

- Indicates that no authorization protocol is in use. 

DES 

- Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56) 

standard.

 

 

55

Summary of Contents for xStack DES-3800 Series









































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3800 Series

2N OfficeRoute Quick Manual preview
OfficeRoute
Brand: 2N Pages: 11
2N stargate How To Set preview
stargate
Brand: 2N Pages: 5
2N Telekomunikace EasyGate IP Brief Manual preview
EasyGate IP
Brand: 2N Telekomunikace Pages: 24
E-Lins H900 Series User Manual preview
H900 Series
Brand: E-Lins Pages: 59
E-Lins H750 Quick Start Manual preview
H750
Brand: E-Lins Pages: 11
E-Lins H700 Series Quick Start Manual preview
H700 Series
Brand: E-Lins Pages: 9
E-Lins H685 Series Quick Start preview
H685 Series
Brand: E-Lins Pages: 5
e-Line Technology Network Video Recorders User Manual preview
Network Video Recorders
Brand: e-Line Technology Pages: 34
Eaton INDGW-X2 Manual preview
INDGW-X2
Brand: Eaton Pages: 10
ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Brand: ICP DAS USA Pages: 8
Edge-Core SDW100 Quick Start Manual preview
SDW100
Brand: Edge-Core Pages: 7
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Brand: EXAGATE Pages: 7
TRENDnet TEM-560T Specifications preview
TEM-560T
Brand: TRENDnet Pages: 2
Commax CVN-0430F User Manual preview
CVN-0430F
Brand: Commax Pages: 122

Brands by name

Popular brands

Load more brands