D-Link xStack DES-3800 Series, User Manual

Page: 238 / 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
The Switch contains one Method List that is set and cannot be removed, yet can be modified. To delete a Login Method List
defined by the user, click the under the Delete heading corresponding to the entry desired to be deleted. To modify a Login
Method List, click on its hyperlinked Method List Name. To configure a new Method List, click the
Add button.
Both actions will result in the same window to configure:
Figure 11- 3 . Login Method List - Edit window (default) 0
Figure 11- 3 . Login Method List – Add window 1
To define a Login Method List, set the following parameters and click Apply :
Parameter Description
Method List Name Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four of the following authentication
methods to this method list:
tacacs - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
•
•
•
•
•
•
•
xtacacs - Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
- Adding this parameter will require the user to be authenticated using the
protocol from a remote server.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
server_group - Adding this parameter will require the user to be authenticated using
a user-defined server group previously configured on the Switch.
local - Adding this parameter will require the user to be authenticated using the local
user account database on the Switch.
none - Adding this parameter will require an authentication to access the Switch.
223