D-Link xStack DES-3800 Series, User Manual

Page: 17 / 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
2
•
Full- and half-duplex for both 10Mbps and 100Mbps connections. Full duplex allows the switch port to simultaneously
transmit and receive data. It only works with connections to full-duplex-capable end stations and switches. Connections
to a hub must take place at half-duplex
Support broadcast storm filtering
•
•
•
•
•
•
•
•
•
•
Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
Supports by-port Egress/Ingress rate control.
Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
Ports
The Switch provides twenty-four 10/100BASE-TX ports for the DES-3828, DES-3828P and DES-3828DC, and forty-eight
10/100BASE-TX ports for the DES-3852. All 10/100BASE-TX ports comply with the following standards:
IEEE 802.3
IEEE 802.3u
Support Half/Full-Duplex operations
All ports support Auto MDI-X/MDI-II cross over
Support back pressure for Half-duplex mode
IEEE 802.3x Flow Control support for Full-Duplex mode.
NOTE: On the DES-3828P, all twenty-four 10/100BASE-TX ports also
comply with the IEEE 802.3af Power over Ethernet standard.
The Switch provides two 1000 BASE-T/SFP combo ports on the front panel for all models. Both 1000BASE-T ports comply with
the following standards:
IEEE 802.3
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3u
IEEE 802.3ab
Support Full-Duplex operations
IEEE 802.3x Flow Control support for Full-Duplex mode
IEEE 802.3z
Both SFP ports support the following transceivers:
DEM-310GT (1000BASE-LX)
DEM-311GT (1000BASE-SX)
DEM-314GT (1000BASE-LH)
DEM-315GT (1000BASE-ZX)
The Switch provides two 1000 BASE-T ports on the rear panel. Both 1000BASE-T ports comply with the following standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
Support Full-Duplex operations
IEEE 802.3x Flow Control support for Full-Duplex mode