D-Link xStack DES-3800 Series, User Manual

Page: 117 / 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Forwarding
Unicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding folder in the
L2 Features menu and click on the Unicast Forwarding link.
Figure 7- 32. Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify :
Parameter Description
VLAN ID (VID) The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Port Allows the selection of the port number on which the MAC address entered above resides.
To delete an entry in the Unicast Forwarding Table , click the corresponding under the Delete heading.
Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding folder located
in L2 Features , and click on the Multicast Forwarding link to see the entry screen below:
Figure 7- 33. Static Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
102