manualshive.com logo in svg

D-Link xStack DES-3526, User Manual

The D-Link xStack DES-3526 is a powerful network switch designed for small to medium-sized businesses. With advanced features and reliable performance, this switch ensures seamless connectivity. To maximize its potential, users can download the comprehensive Cli Manual for free from our website, manualshive.com.

Share
Download
background image

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

 

113

IP-MAC Binding 

The IP network layer uses a four-byte address. The Ethernet link layer uses a six-byte MAC address. Binding these two address 
types together allows the transmission of data between the layers. The primary purpose of IP-MAC binding is to restrict the access 
to a switch to a number of authorized users. Only the authorized client can access the Switch’s port by checking the pair of IP-
MAC addresses with the pre-configured database. If an unauthorized user tries to access an IP-MAC binding enabled port, the 
system will block the access by dropping its packet. The maximum number of IP-MAC binding entries is dependant on chip 
capability (e.g. the ARP table size) and storage size of the device. For the xStack DES-3500 Series switches, the maximum 
number of IP-MAC Binding entries is 512. The creation of authorized users can be manually configured by CLI or Web. The 
function is port-based, meaning a user can enable or disable the function on the individual port. 

ACL Mode 

 

                                                                                Figure 6- 96. Access Profile Table –IP-MAC ACL Mode Enabled 

 

 

 

To view the particular configurations associated with these two entries, click their corresponding hyperlinked Profile IDs, which 
will display the following: 

                          

 

Figure 6- 97. Access Profile Entry Display for IP-MAC ACL Mode Enabled Entries 

These two entries cannot be modified or deleted using the Access Profile Table, and any attempt to do so will result in the 
following warning message: 

 

Figure 6- 98. IP-MAC ACL Mode warning 

Due to some special cases that have arisen with the
IP-MAC binding, this Switch has been equipped
with a special ACL Mode for IP-MAC Binding,
which should alleviate this problem for users.
When enabled in the

 IP-MAC Binding Port

window, the Switch will create two entries in the
Access Profile Table as shown below. The entries
may only be created if there are at least two Access
Profile IDs available on the Switch. If not, when
the ACL Mode is enabled, an error message will be
prompted to the user. When the ACL Mode is
enabled, the Switch will only accept IP packets
from a created entry in the IP-MAC Binding
Setting window. All others will be discarded. 

Summary of Contents for xStack DES-3526





































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3526

Observint N16 Quick Setup Manual preview
N16
Brand: Observint Pages: 11
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
Idis DR-8432 Installation Manual preview
DR-8432
Brand: Idis Pages: 31
Patton electronics SMARTNODE 4552 Getting Started Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 65
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
TP-Link ER8411 Installation Manual preview
ER8411
Brand: TP-Link Pages: 2
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Brand: Maipu Pages: 80
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
axing EOC 30-01 Quick Start Manual preview
EOC 30-01
Brand: axing Pages: 4
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Abocom SDW11B Specification Sheet preview
SDW11B
Brand: Abocom Pages: 1
TRENDnet TEG-S16R - DATA SHEETS Quick Installation Manual preview
TEG-S16R - DATA SHEETS
Brand: TRENDnet Pages: 12
Honeywell Home LTEM-PA Installation And Setup Manual preview
LTEM-PA
Brand: Honeywell Home Pages: 36

Brands by name

Popular brands

Load more brands