xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
133
Figure 7- 17. Enable Method List - Edit window
Figure 7- 18. Enable Method List - Add window
To define an Enable Login Method List, set the following parameters and click
Apply
:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four of the following authentication methods to
this method list:
•
local_enable
- Adding this parameter will require the user to be authenticated using
the local enable password database on the Switch. The user in the next section
entitled Local Enable Password must set the local enable password.
•
none
- Adding this parameter will require an authentication to access the Switch.
•
radius
- Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
•
tacacs
- Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
•
xtacacs
- Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
•
- Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
•
server_group - Adding a previously configured server group will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
Local Enable Password
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view the following window, click
Security Management > Access Authentication Control > Local Enable Password
:
