manualshive.com logo in svg

D-Link xStack DES-3526, User Manual

The D-Link xStack DES-3526 is a powerful network switch designed for small to medium-sized businesses. With advanced features and reliable performance, this switch ensures seamless connectivity. To maximize its potential, users can download the comprehensive Cli Manual for free from our website, manualshive.com.

Share
Download
background image

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 

 

131

Login Method Lists 

This command will configure a user-defined or default Login Method List of authentication techniques for users logging on to the 
Switch. The sequence of techniques implemented in this command will affect the authentication result. For example, if a user 
enters a sequence of techniques, for example TACACS - XTACACS- local, the Switch will send an authentication request to the 
first TACACS host in the server group. If no response comes from the server host, the Switch will send an authentication request 
to the second TACACS host in the server group and so on, until the list is exhausted. At that point, the Switch will restart the same 
sequence with the following protocol listed, XTACACS. If no authentication takes place using the XTACACS list, the local 
account database set in the Switch is used to authenticate the user. When the local method is used, the privilege level will be 
dependant on the local account privilege configured on the Switch. 

Successful login using any of these techniques will give the user a "User" privilege only. If the user wishes to upgrade his or her 
status to the administrator level, the user must use the 

Enable Admin 

window, in which the user must enter a previously 

configured password, set by the administrator. (See the Enable Admin part of this section for more detailed information 
concerning the Enable Admin command.) 

To view the following window click 

Security Management > Access Authentication Control > Login Method Lists

: 

 

Figure 7- 13. Login Method Lists Settings window 

The Switch contains one Method List that is set and cannot be removed, yet can be modified. To delete a Login Method List 
defined by the user, click the 

X

 under the Delete heading corresponding to the entry desired to be deleted. To modify a Login 

Method List, click on its hyperlinked Method List Name. To configure a new Method List, click the 

Add

 button.  

Both actions will result in the same window to configure: 

 

Figure 7- 14. Login Method List - Edit window (default) 

 

Figure 7- 15. Login Method List – Add window 

To define a Login Method List, set the following parameters and click 

Apply

: 

 

 

 

Summary of Contents for xStack DES-3526





































































































































































































































































Reviews:

No comments

Related manuals for xStack DES-3526

Abocom FW200 Specifications preview
FW200
Brand: Abocom Pages: 1
Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Tandberg Data RDX QuikStation 4 Quick Start Manuals preview
RDX QuikStation 4
Brand: Tandberg Data Pages: 2
AlphaShield INTERNET PRIVACY PROTECTION (Spanish) Manual Del Usuario preview
INTERNET PRIVACY PROTECTION
Brand: AlphaShield Pages: 49
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Abocom WM3111 Specification preview
WM3111
Brand: Abocom Pages: 1
ZyXEL Communications XS1920 Series User Manual preview
XS1920 Series
Brand: ZyXEL Communications Pages: 422
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
Dahua D-NVR4108HS-4KS2/L Quick Start Manual preview
D-NVR4108HS-4KS2/L
Brand: Dahua Pages: 33
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
LevelOne FSW-0512 Specification Sheet preview
FSW-0512
Brand: LevelOne Pages: 2
Carrier 40VMW005 Installation And Maintenance Instructions Manual preview
40VMW005
Brand: Carrier Pages: 18
Qvis 72-8P Series User Manual preview
72-8P Series
Brand: Qvis Pages: 233
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Brand: QSC Pages: 13
NetComm Wireless NTC-140-01 User Manual preview
NTC-140-01
Brand: NetComm Wireless Pages: 154
Infortrend EonStor GS 3000 Series Hardware Manual preview
EonStor GS 3000 Series
Brand: Infortrend Pages: 134
3Com X5 Quick Start preview
X5
Brand: 3Com Pages: 2

Brands by name

Popular brands

Load more brands