D-Link Wireless VPN Router DI-824VUP Factory Default Settings Download

Page: 1 / 55

101

After you have tried other methods for troubleshooting your network, you
may choose to

Reset

the DI-824VUP to the factory default settings.

To hard-reset the D-Link DI-824VUP to the Factory Default Settings, please
do the following:

Resetting the DI-824VUP to the
Factory Default Settings

Use a paper clip to press the

Reset

button and

power on.

Locate the

Reset

button on the back of the DI-824VUP.

After you have completed the above steps, the DI-
824VUP will be reset to the factory default settings.

Hold for about 5 seconds (do not hold for too long)
and then release. (Or, release when the status
LEDflashes.)

Summary of Contents for Wireless VPN Router DI-824VUP
























































Search results

Summary of Contents for Wireless VPN Router DI-824VUP

Reviews:

Related manuals for Wireless VPN Router DI-824VUP

Brands by name

Popular brands

D-Link Wireless VPN Router DI-824VUP, Factory Default Settings

Search results

Summary of Contents for Wireless VPN Router DI-824VUP

Reviews:

Related manuals for Wireless VPN Router DI-824VUP

Brands by name

Popular brands