DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Creating 3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, proceed to the
USB modem
menu and enter the PIN code on the
page displayed (see the
USB Modem
section, page 169). Then proceed to the
Net / WAN
page,
click the
Add
button, and select the
3G
value from the
Connection Type
drop-down list.
Figure 77. The page for creating a new connection. The
General settings
and
3G
sections.
Parameter
Description
General settings
Provider
To automatically specify all settings required to connect to the
Internet, select your country and operator from the drop-down list.
To specify all settings independently, leave the
Manually
value.
Port
Select the
USB
value.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
3G
Mode
The value of the field specifies the type of the network to which the
router connects. Leave the
auto
value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
For GSM USB modems only
.
Page
94
of 202
