D-Link User ManualDIR-620 User Manual Download Page 33

Page: 33 / 202

DIR-620

Multifunction Wireless Router Supporting WiMAX,

3G GSM/CDMA with Built-in Switch

User Manual

Installation and Connection

Saving and Restoring Settings

Note that you should regularly save the changes of the router's settings to the non-
volatile memory.

The router's web-based interface displays the notification on unsaved changes at the top of the page.

Figure 22. The notification on unsaved changes.

Place the mouse pointer on the

Notifications

icon (

) to view the list of unsaved changes and

click the relevant link.

You can save the router's settings via the top-page menu displayed when the mouse pointer is over
the

System

caption.

Figure 23. The top-page menu.

Click the

Reboot

line if you have already saved the router's settings.

Click the

Save&Reboot

line to save new settings and immediately reboot the router.

Click the

Save

line to save new settings to the non-volatile memory and continue configuring the

device. Also you can save the device's parameters via the

Save

button on the

System /

Configuration

page.

Click the

Backup

line and follow the dialog box appeared to save the configuration (all settings of

the router) to your PC. Also you can save the router's configuration to your PC via the

Backup

button on the

System / Configuration

page.

Click the

Factory

line to restore the factory default settings. Also you can restore the factory

defaults via the

Factory

button on the

System / Configuration

page.

Also you can restore the factory default settings via the hardware

RESET

button. The button is

located on the back panel of the router next to the power connector.

Page

of 202

Summary of Contents for User ManualDIR-620











































































































































































































Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands

D-Link User ManualDIR-620, User Manual

Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands