D-Link User ManualDIR-620 User Manual Download Page 12

Page: 12 / 202

DIR-620

Multifunction Wireless Router Supporting WiMAX,

3G GSM/CDMA with Built-in Switch

User Manual

Overview

Delivery Package

The following should be included:

•

Wireless router DIR-620

•

Power adapter 5V/2.5A

•

Ethernet cable (CAT 5E)

•

“

Quick Installation Guide

” (brochure).

The “

User Manual

” and “

Quick Installation Guide

” documents in Russian and English are

available on D-Link website (see

ftp.dlink.ru/pub/Router/DIR-620/Description/RevA/1_4_0/

Using a power supply with a different voltage rating than the one included will cause
damage and void the warranty for this product.

Page

of 202

Summary of Contents for User ManualDIR-620











































































































































































































Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands

D-Link User ManualDIR-620, User Manual

Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands