D-Link User ManualDIR-620 User Manual Download Page 174

Page: 174 / 202

DIR-620

Multifunction Wireless Router Supporting WiMAX,

3G GSM/CDMA with Built-in Switch

User Manual

Configuring via Web-based Interface

USB Storage

This menu is designed to operate USB storages. Here you can do the following:

•

view data on the connected USB storage

•

view content of the connected USB storage and configure access to it

•

configure the router as a print server

•

enable the built-in FTP server of the router.

Information

On the

USB storage / Information

page, you can view data on the USB storage connected to the

router.

Figure 141. The

USB storage / Information

page.

The following data are presented on the page: the name, total and free space of the storage, and the
type of its file system.

If the USB storage is divided into volumes, several values are displayed in the

USB storage

drop-

down list. Select the needed value to view data on the volume (partition) of the USB storage.

To safely disconnect the USB storage, click the

Unmount storage

button. When the

value is

displayed in the

USB storage

drop-down list, remove the storage from the router.

To disconnect one volume of the storage, select the needed value from the

USB storage

drop-

down list and click the

Unmount volume

button.

Page

174

of 202

Summary of Contents for User ManualDIR-620











































































































































































































Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands

D-Link User ManualDIR-620, User Manual

Search results

Summary of Contents for User ManualDIR-620

Reviews:

Related manuals for User ManualDIR-620

Brands by name

Popular brands