D-Link SmartPro DGS-1500-20, User Manual

Page: 85 / 93

6 Command Line Interface
D-Link Web Smart Switch User Manual
80
TFTP server.
cfg_toTFTP
−
Specifies that the Switch’s current settings will be
uploaded to the TFTP server.
tftp://ip-address/
−
The IP address of the TFTP server.
filename
−
The filename of the firmware or switch configuration
file on the TFTP server. You need to specify the DOS path if the
file is not at the root directory of the TFTP server.
Restrictions None.
Example usage:
To upload a firmware file:
DGS-1500-28>upload firmware_toTFTP 1.1.1.23 1\running—config
01–Jan–2000 01:26:11 %COPY–I–FILECPY: Files Copy – source URL
running–config destination URL tftp://1.1.1.23/1\running–config
…..01–Jan–2000 01:26:16 %COPY–W–TRAP: The copy operation was
completed success fully
!
158 bytes copied in 00:00:05 [hh:mm:ss]
DGS-1500-28>
config ipif system
Purpose To configure the System IP interface.
Syntax config ipif system { ipaddress <ip-address> <subnet-mask>
gateway <gw-address> | dhcp }
Description The
config ipif s ys tem
command configures the System IP
interface on the Switch.
Parameters ipaddress <ip-address> <subnet-mask>
−
The IP address and
subnet mask to be created. Users need to specify the address
and mask information using the traditional format (for
example,10.1.2.3/255.0.0.0)
gateway <gw-address>
−
The IP address of the router or
gateway.
dhcp
−
Allows the selection of the DHCP protocol for the
assignment of an IP address to the Switch’s System IP interface.
Restrictions None.
Example usage:
To configure the IP interface System:
DGS-1500-28> config ipif System ipaddress 10.48.74.122/8
Success.
DGS-1500-28>