D-Link SmartPro DGS-1500-20, User Manual

Page: 33 / 93

5 Configuration
D-Link Web Smart Switch User Manual
28
System > DHCP Auto Configuration
This page allows you to enable the DHCP Auto Configuration feature on the Switch. When enabled, the
Switch becomes a DHCP client and gets the configuration file from a TFTP server automatically on next boot
up. To accomplish this, the DHCP server must deliver the TFTP server IP address and configuration file
name information in the DHCP reply packet. The TFTP server must be up and running and store the
necessary configuration file in its base directory when the request is received from the Switch.
Figure 5.21 – System > DHCP Auto Configuration
System > SysLog Host Settings
The SysLog Host Settings page allows user to send Syslog messages to up to four designated servers using
the
System Log Server . To set the System Log Server configuration, click Apply .
Figure 5.22 – System > SysLog Host Settings
System Log: Enabled or Disabled the SysLog Host feature.
Server IP Address: Specifies the IP address of the system log server.
UDP Port (1 - 65535): Specifies the UDP port to which the server logs are sent. The possible range is 1 –
65535 , and the default value is 514 .
Time Stamp : Select Enable to time stamp log messages.
Severity: Specifies the minimum severity from which warning messages are sent to the server. There are
three levels. When a severity level is selected, all severity level choices above the selection are selected
automatically. The possible levels are:
Warning - The lowest level of a device warning. The device is functioning, but an operational
problem has occurred.
Informational - Provides device information.
All - Displays all levels of system logs.
Facility: Specifies an application from which system logs are sent to the remote server. Only one facility can
be assigned to a single server. If a second facility level is assigned, the first facility is overwritten. There are
up to eight facilities can be assigned (Local 0 ~ Local 7).
System > Time Profile
The Time Profile page allows users to configure the time profile settings of the device.
Figure 5.23 – System > Time Profile Settings