346
D-Link ShareCenter™
DNS-320L
User Manual
Section 4 - Configuration
COMPONENT
DESCRIPTION
Motion Detection
When using the Record by Schedule mode together with the Motion Detection function, you
must first click the
Go.to.Web.
link and log in to the camera’s web interface and enable the motion
detection function on that camera. Please refer to the manual of your camera for more information
on enabling motion detection.
Copy
Copy the camera recording setup to other similar cameras
Quota Settings
Configurable per camera. Indicates the maximum amount of disk space will be used for recordings.
Automatic Overwrite
Click this checkbox if you wish to overwrite the earliest recorded video with the latest video if reaches
the quota limitation or disk space is full.
Quota
Click this checkbox to set the amount of storage you want to allocate to each camera. Next to it is
displayed the remaining free disk space
Keep the File within
This indicates how long you want to keep the recorded camera video files before it is overwritten.
Estimate Required Space Click this button to find out how much disk space is required for video storage with the current
settings.
Event Record: Pre-record If required, select how long video should be recorded for prior to an event alarm being triggered
(1-180 seconds).
Event Record: Post Record If required, select how long video should be recorded for following an event alarm being triggered
(1-180 seconds).
Record Mode
No Record - no recording is made
Record Mode
Record by Schedule - Drag and drop on the weekly map below
•
Always.Record
means that the camera will always record for the specified period.
•
Motion.Detection.Record
will wait for motion on the camera to be detected before it begins
recording
•
Event.Record
will wait for event on the camera to be triggered before it begins recording
Record Mode
Manual Record - requires you to manually click a record button to begin recording.
