D-Link ShareCenter DNS-320L User Manual Download Page 170

Page: 170 / 445

164

D-Link ShareCenter™

DNS-320L

User Manual

Section 4 - Configuration

Step.7.-.

Here you can assign privileges to this share.

Opportunistic locks (oplocks) are a characteristic of the LAN

Manager networking protocol implemented in the 32-bit

Windows family.

Oplocks are guarantees made by a server for a shared logical

volume to its clients. These guarantees inform the Client that a

file’s content will not be allowed to be changed by the server,

or if some change is imminent, the client will be notified before

the change is allowed to proceed.

Oplocks are designed to increase network performance when

it comes to network file sharing. However it is recommended

to set the share oplocks to No (off) when using file-based

database applications. When enabled “Map Archive”, the

file attribute will be copied as the file is being stored on the
ShareCenter

™

Click

Next

to continue.

Summary of Contents for ShareCenter DNS-320L






























































































































































































































































































































































































































































Search results

Summary of Contents for ShareCenter DNS-320L

Reviews:

Related manuals for ShareCenter DNS-320L

Brands by name

Popular brands

D-Link ShareCenter DNS-320L, User Manual

Search results

Summary of Contents for ShareCenter DNS-320L

Reviews:

Related manuals for ShareCenter DNS-320L

Brands by name

Popular brands