44
Click
Apply
to make
changes effective
Using the DCS-5300G with an Internet
browser (continued)
Configuration > Advanced > Mail & FTP (Continued)
2nd FTP user name -
Granted user name on the backup FTP server.
2nd FTP password -
Granted password on the backup FTP server.
2nd FTP server -
The domain name or IP address of the external
FTP server. Note that the 2nd FTP server will only
be used if the 1st FTP server is unavailable. If
image upload to the 1st FTP server is successful,
no attempts will be made to connect to the 2nd
FTP server.
2nd FTP remote folder -
Granted folder on the backup FTP server.
Mode -
Passive mode setting for the backup FTP server.
Secondary FTP passive
Invalid settings may cause the
DCS-5300G
to not respond. Change the
configuration settings only if necessary. Consult with your network
administrator or your Internet Service Provider (ISP) if you do not have the
necessary information. If you cannot connect to the camera, refer to page
131 for camera
reset
and
restore
factory settings procedures.
If the
DCS-5300G
is located inside a network that
is protected by a firewall, a data connection for
FTP may be prohibited. Passive mode FTP can
bypass this rule and allow the uploading of
snapshots. If the passive mode is selected, the
DCS-5300G
can automatically attempt to upload
in active mode if the external FTP server does
not support passive mode.
Primary FTP Passive
Mode-
Summary of Contents for SECURICAM Network DCS-5300G
Page 141: ...141 Time Zone Table continued ...
