124
Schedule Video Recording with Motion
Detection
Next, run the
IP surveillance
program. Click on the
Configurations
button
and select
Scheduler
.
Check “Enable motion detection.”
Click on “New” to have a new window to monitor video.
Enter in a window name.
Adjust the “Sensitivity” and “Percentage” levels according to the local
environment. The highest sensitivity and lowest percentage provides
the most sensitive setting.
5
5
5
5
5
After adding the motion window, click on save to enable the
activity display. You can add up to 3 motion windows to trigger
recording.
To schedule video recording with motion detection, you must first enable motion
detection on the Internet Camera. Click the
Motion Detection
button under
the
Advanced
tab from the
Configuration
screen to access settings that affect
how the
DCS-5300G
Internet Camera can serve as a security device by
recording only when motion is detected. Note: These settings can be configured
in your Web browser and while logged into the
IP surveillance
Program.
In this window, follow the steps below to ensure that motion detection is correctly
enabled:
For detailed information about each setting, please refer to
Configuration >
Advanced > Motion Detection
in the section titled “Using the DCS-3220G
With an Internet Browser” (page 51).
Click
Motion Detection
Summary of Contents for SECURICAM Network DCS-5300G
Page 141: ...141 Time Zone Table continued ...
