manualshive.com logo in svg

D-Link SECURICAM Network DCS-2100, User Manual

Share
Download
D-Link SECURICAM Network DCS-2100 User Manual Download Page 79

79

DCS-2100 User’s Manual

D-Link Systems, Inc.

Using IP Surveillance Software

Monitor Program

Features of the Monitor Program

Traditional Surveillance Features:

„

Real-time monitoring

„

Pan and Tilt control

„

Recording

Special Features:

The digital surveillance system supports not only the features listed above, but also the
following features, which make the system more powerful and convenient.

„

Simultaneous real-time monitoring and recording audio and video

„

High quality video up to full screen display

„

High compression ratio

„

Maximum of 16 cameras with different monitor layouts

„

Auto alarm in multiple modes

„

Account-password protection

„

Multiple recording modes: Event-driven, Scheduled, and manual recording for
each camera.

„

Just-in-time snapshot

„

Motion detection with 3 alert windows for each camera

Summary of Contents for SECURICAM Network DCS-2100











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands