manualshive.com logo in svg

D-Link SECURICAM Network DCS-2100, User Manual

Share
Download
D-Link SECURICAM Network DCS-2100 User Manual Download Page 127

127

DCS-2100 User’s Manual

D-Link Systems, Inc.

Adjusting the Camera Focus

Note: You can further adjust the Internet Camera’s image quality through the Web
configuration under: Configuration > Advanced > Video. Please refer to page 51 for
further details.

To adjust the focus of the lens you will need to turn the lens slowly either clockwise or
counterclockwise until the desired image appears. DO NOT overturn the lens in either
direction as it will be out of focus or may damage the camera. Unless you want to
substitute the lens DO NOT unscrew more than 1.0mm apart from the Fixed Lens
Assembly.

To help you get the best image quality, keep in mind that while adjusting the cameras
focus you can preview the image quality from your Web browser.

Adjusting the Camera Focus

The DCS-2100 Internet Camera features an interchangeable lens that can be used for
different applications as necessary. It supports rotational focus control so the lens can
be adjusted to focus under normal and stable conditions to maximize the image quality
of the Internet Camera.

Summary of Contents for SECURICAM Network DCS-2100











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands