manualshive.com logo in svg

D-Link SECURICAM Network DCS-2100, User Manual

Share
Download
D-Link SECURICAM Network DCS-2100 User Manual Download Page 54

54

DCS-2100 User’s Manual

D-Link Systems, Inc.

Using the DCS-2100 with an Internet Browser

Image Setting

Advanced > Image Setting

Click the Image Setting button from the Configuration screen to access additional settings
that affect how the video image appears.

From this screen you can fine tune the video image.

Image Brightness, Contrast, Saturation and Hue are all adjusted in the same manner.
For each video compensation you can set from among eleven levels ranged from -5 to
+5.  The default setting is zero for each adjustment.

You may press the Preview button to fine-tune the image and see what affect the setting
will have on the image. When the image is acceptable, press the Save button to store
the image settings, or press the Restore button to recall the original settings. If settings
are changed without saving, they will be used until the next system start-up.

Summary of Contents for SECURICAM Network DCS-2100











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands