![background image](http://html.mh-extra.com/html/d-link/securicam-dcs-6110/securicam-dcs-6110_user-manual_77774080.webp)
Appendix B - Reset and Restore
80
D-Link DCS-6110 User Manual
Reset and Restore
RESET
: 1.
.
3.
RESTORE
: 1.
.
3.
Restoring the factory defaults will result in
the loss of any previous settings and will
require running the Installation Wizard to
return the
DCS-6110
to a normal state.
The LED on the front of the camera will begin blinking
red and green.
Lightly insert a paper clip (or a similar sized tool) into the
reset hole on the back of the camera, press lightly and
then release the button.
Insert the paperclip or other tool and press on the button
continuously.
Wait for the LED on the front of the camera to blink red
and green and hold the button for 30 seconds.
Withdraw the tool after the second cycle of the LED
blinking and a factory restore has been completed.
When the LED stops the blinking the reset has
completed.
Reset button
There is a button hidden in the pinhole beside the Ethernet socket. It is used to
reset
the system or
restore
the factory
default settings. Sometimes resetting the
DCS-6110
will return the system back to a normal state. If the system still has
problems after reset, restore the factory settings and install again:
Summary of Contents for SECURICAM DCS-6110
Page 1: ......
Page 65: ...65 D Link DCS 6110 User Manual Section 3 Configuration Help ...