79
D-Link DCS-6110 User Manual
Appendix A - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow
the steps below:
Step 1
Windows
®
XP - Click on
Start
>
Control Panel
>
Network Connections
.
Windows
®
000 - From the desktop, right-click
My Network Places
>
Properties
.
Step 2
Right-click on the
Local Area Connection
which represents your D-Link network adapter and select
Properties
.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4
Click
Use the following IP address
and enter an IP address that is on the same subnet as your network or the LAN IP
address on your access point.
Example: If the network camera’s LAN IP address is 19.168.0.1, make your IP
address 19.168.0.X where X is a number between and 99. Make sure that the
number you choose is not in use on the network. Set Default Gateway the same
as the LAN IP address of your access point (19.168.0.1).
Set Primary DNS the same as the LAN IP address of your access point (19.168.0.1).
The Secondary DNS is not needed or you may enter a DNS server from your
ISP.
Step 5
Click
OK
twice to save your settings.
Summary of Contents for SECURICAM DCS-6110
Page 1: ......
Page 65: ...65 D Link DCS 6110 User Manual Section 3 Configuration Help ...