![background image](http://html.mh-extra.com/html/d-link/securicam-dcs-3415/securicam-dcs-3415_quick-installation-manual_77771003.webp)
3
D-Link DCS-3415 Quick Install Guide
Hardware Overview
Hardware Overview
Connections
Rear View
Microphone Connector
The DCS-3415 has an internal
built-in microphone. To use an
external microphone, plug it into
the microphone connector.
Microphone On/Off Switch
Select to turn the microphone
On
or
Off
.
Audio Out Connector
Use the Audio Out connector for
2-way audio connection. Speakers
(not included) may be connected
to the camera for 2-way audio
communication.
Ethernet Cable Connection (PoE)
The network camera’s back panel
features an RJ-45 connector for
10Base-T Ethernet or 100Base-TX
Fast Ethernet cabling. This port
supports the NWay protocol, allowing
the network camera to automatically
detect or negotiate the transmission
speed of the network.
The Ethernet port can also be used
to power the camera by using a
PoE switch.
DI/DO
The DCS-3415 provides a general I/O terminal block.
The I/O connectors provide the physical interface to
send and receive digital signals to and from a variety of
external devices.
DC12V output
Support for external device (like IR light)
RS485
Port is designed for external pan/tilt/zoom devices.
Reset Button
To reset the camera to the
factory default settings,
hold the button down for
30 seconds until the power
LED flashes through its
cycle twice.
DC Power Connector
T h e D C p o w e r i n p u t
connector is located on the
back panel. This is labeled
“12V DC” with a single
socket to supply power to
the Network Camera.