![background image](http://html1.mh-extra.com/html/d-link/netdefend-dfl-260e/netdefend-dfl-260e_manual_3209996185.webp)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.52.18. RoutingSettings
Description
Configure the routing capabilities of the system.
Properties
RouteFailOver_IfacePollInterval
Time (ms) between polling of interface failure.
(Default: 500)
RouteFailOver_ARPPollInterval
Time (ms) between ARP-lookup of gateways. May
be overridden for each route. (Default: 1000)
RouteFailOver_PingPollInterval
Time (ms) between PING'ing of gateways. (Default:
1000)
RouteFailOver_GraceTime
Time (s) between startup/reconfigure and monitoring
start. (Default: 30)
RouteFailOver_ConsecFails
Number of consecutive failures before route is
marked as unavailable. (Default: 5)
RouteFailOver_ConsecSuccess
Number of consecutive success before route is
marked as available. (Default: 5)
Transp_CAMToL3CDestLearning
Do L3 Cache learning based on destination IPs and
MACs in combination with CAM table contents.
(Default: Yes)
Transp_DecrementTTL
Decrement TTL on packets forwarded between
transparent interfaces. (Default: No)
Transp_CAMSize_Dynamic
Allocate the CAM Size value dynamically. (Default:
Yes)
Transp_CAMSize
Maximum number of entries in each CAM table.
(Default: 8192)
Transp_L3CSize_Dynamic
Allocate the L3 Cache Size value dynamically.
(Default: Yes)
Transp_L3CSize
Maximum number of entries in each Layer 3 Cache.
(Default: 8192)
Transp_RelaySTP
Relay Spanning-Tree (STP, RSTP and MSTP)
Bridge Protocol Data Units to all switch interfaces.
(Default: Drop)
Transp_RelayMPLS
Forward MPLS packets to all switch interfaces.
(Default: Drop)
3.52.18. RoutingSettings
Chapter 3. Configuration Reference
185