D-Link NetDefend DFL-260E Page 100 Manual Download

Page: 100 / 198

3.11. DateTime

Description

Set the date, time and time zone information for this system.

Properties

TimeZone

Specifies the time zone. (Default: GMT)

DSTEnabled

Enable daylight saving time. (Default: Yes)

DSTOffset

Daylight saving time offset in minutes. (Default: 60)

DSTStartMonth

What month daylight saving time starts. (Default:
March)

DSTStartDay

What day of month daylight saving time starts.
(Default: 1)

DSTEndMonth

What month daylight saving time ends. (Default:
October)

DSTEndDay

What day of month daylight saving time ends.
(Default: 1)

TimeSynchronization

Enable time synchronization. (Default: Disable)

TimeSyncServerType

Type of server for time synchronization, UDPTime
or SNTP (Simple Network Time Protocol). (Default:
SNTP)

TimeSyncServer1

DNS hostname or IP Address of Timeserver 1.

TimeSyncServer2

DNS hostname or IP Address of Timeserver 2.
(Optional)

TimeSyncServer3

DNS hostname or IP Address of Timeserver 3.
(Optional)

TimeSyncInterval

Seconds between each resynchronization. (Default:
86400)

TimeSyncMaxAdjust

Maximum time drift in seconds that a server is al-
lowed to adjust. (Default: 600)

TimeSyncGroupIntervalSize

Interval according to which server responses will be
grouped. (Default: 10)

Comments

Text describing the current object. (Optional)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

3.11. DateTime

Chapter 3. Configuration Reference

100

Summary of Contents for NetDefend DFL-260E







































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands