(watching for old dups). (Default: 20)
IP6ReassIllegalLinger
How long to remember an illegal reassembly
(watching for more fragments). (Default: 60)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.52.7. HWMSettings
Description
General settings for Hardware Monitoring
Properties
EnableSensors
Enable/disable all HWM functionality. (Default: No)
SensorPollInterval
Sensor polling interval. (Default: 500)
MemoryPollInterval
Memory polling interval in minutes. (Default: 15)
MemoryUsePercent
Should mem monitor use percentage as unit for
monitoring, else it is megabyte. (Default: Yes)
MemoryLogRepetition
Should a log message be sent for each poll result that
is in the Alert, Critical or Warning level, or should a
log message only be sent when a new level is
reached. (Default: No)
MemoryAlertLevel
Alert log message if free memory is below this
value, disable by using 0. (Default: 0)
MemoryCriticalLevel
Critical log message if free memory is below this
value, disable by using 0. (Default: 0)
MemoryWarningLevel
Warning log message if free memory is below this
value, disable by using 0. (Default: 0)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
3.52.8. ICMPSettings
Description
Settings related to the ICMP protocol.
Properties
3.52.7. HWMSettings
Chapter 3. Configuration Reference
176