Hardware Overview
Power LED
Status LED
Outlet
WPS/Reset Button
ON/OFF Button
Front View
WPS/Reset Button
WPS
Press for one second to start the WPS
connection process. The Status LED will start
to blink green.
Reset
Press and hold until the Status LED turns
red in order to reset the device back to
the factory default settings
(for about 10
seconds)
.
ON/OFF Button
Press to turn the device connected to the DSP-W215
ON
or
OFF.
Status LED
Solid Green
The Smart Plug is successfully connected to
your network.
Blinking Green
The WPS process is in progress.
Blinking Orange
The Smart Plug is not properly connected
with your wireless network.
Solid Red
The Smart Plug is powering on, attempting
to reset, or the device is defective.
Off
If the Smart Plug will not power on, try
plugging the Smart Plug into another outlet.
Power LED
Solid Green
The electronic device you plugged into your
Smart Plug is powered on.
Off
The device you plugged into your Smart Plug
is turned off or not receiving power.
Outlet
Connect your appliances, lamps, and other electronic devices you
wish to monitor.
4
