37
Your current wireless settings
are displayed based on the
SSID you selected in the
previous step. If you chose the
enter the SSID manually, then
the default settings are entered.
Current Wireless Settings
SSID
The SSID name selected on the
previous screen appears here.
You can change the SSID you
selected or enter one manually
by pressing the
ENTER
button
on the remote control with this field highlighted. The on-screen keyboard will
be displayed and you can enter the SSID.
Mode
There are two different modes to select from: Ad-Hoc and Infrastructure Mode.
Ad-Hoc Mode is used for peer to peer wireless networks that do not contain a
router or an access point. Infrastructure Mode is used for networks with an
access point or router. To toggle between the two, press the
ENTER
button
when Mode is highlighted. The
up arrow
and
down arrow
will toggle between
the two options. Press
ENTER
again to select.
WEP
WEP (Wired Equivalent Privacy) is an industry standard encryption technology
used by wireless devices. There are five options configurable under this setting,
Disable, 64-bit Hex, 128-bit Hex, 64-bit ASCII, and 128-bit ASCII. To toggle
between the options, press the
ENTER
button when WEP is highlighted. The
up arrow
and
down arrow
will toggle between the three options. Press
ENTER
again to select.
Key Index
Select a number between 1 and 4. To toggle between the options, press the
ENTER
button when Key Index is highlighted. The
up arrow
and
down arrow
will toggle between the four. Press
ENTER
again to select.
Key
To connect to an encrypted wireless device, the key you enter here must match
the key of the device exactly. Press the
ENTER
button on the remote control
with this field highlighted to enter a key. The on-screen keyboard will be displayed
and you can enter the key.
The DSM-320 Setup Wizard (continued)
