manualshive.com logo in svg

D-Link GO-DSL-AC750, User Manual

Share
Download
D-Link GO-DSL-AC750 User Manual Download Page 9

4

D-Link Wireless AC Dual-Band ADSL Router User Manual

Section 1 - Product Overview

• Ultimate Fast Wireless Networking

 - The Wireless AC Dual-Band ADSL2+ Modem Routerprovides up to 

300Mbps wireless connection in 2.4GHz band, 433Mbps wireless connection in 5GHz with other 802.11ac and 

draft 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as 

video streaming, online gaming, and real-time audio. The performance of this 802.11ac wireless router gives 
you the freedom of wireless networking at speeds 3x faster than 802.11n.

• Compatible with 802.11a/g/n Devices

 - The Wireless AC Dual-Band ADSL2+ Modem Router is still fully 

compatible with the IEEE 802.11a, 802.11g and 802.11n, so it can connect with existing 802.11a, 802.11g and 
802.11n PCI, USB, and Cardbus adapters.

• Advanced Firewall Features

 - The Web-based user interface displays a number of advanced network 

management features including: 

• 

Content Filtering

 - Easily applied content filtering based on MAC Address, URL, and/or Domain 

Name.

• 

Filter Scheduling

 - These filters can be scheduled to be active on certain days or for a duration of 

hours or minutes.

• 

Secure Multiple/Concurrent Sessions

 - The Wireless AC Dual-Band ADSL2+ Modem Router can 

pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users 
behind the Wireless AC Dual-Band ADSL2+ Modem Router can securely access corporate networks.

• User-friendly Setup Wizard

 - Through its easy-to-use Web-based user interface, the Wireless AC Dual-Band 

ADSL2+ Modem Router lets you control what information is accessible to those on the wireless network, whether 
from the Internet or from your company’s server. Configure your router to your specific settings within minutes.

* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions 

and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental 

conditions will adversely affect wireless signal range.

Features

Summary of Contents for GO-DSL-AC750




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands