manualshive.com logo in svg

D-Link GO-DSL-AC750, User Manual

Share
Download
D-Link GO-DSL-AC750 User Manual Download Page 2

i

D-Link Wireless AC Dual-Band ADSL Router User Manual

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any 

person or organization of such revisions or changes.

Manual Revisions

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United 

States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of 

their respective companies.

Copyright © 2014 by D-Link Systems, Inc.

All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission 

from D-Link Systems, Inc.

Power Usage

This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby 

mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. 

Network Standby(Idle state)

: 5.2 watts

Switched Off(off state)

: 0.2 watts

Revision

Date

Description

1.0

February 24, 2014

• Initial release for Revision A1

1.01

June 06, 2014

• change Model description

1.02

October 22, 2014

• Power Usage

1.03

December 04, 2014

• Corrections

Preface

Summary of Contents for GO-DSL-AC750




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands