D-Link GO-DSL-AC750 User Manual Download Page 84

Page: 84 / 131

D-Link Wireless AC Dual-Band ADSL Router User Manual

Section 3 - Configuration

Firmware Update

Current Firmware

Version:

This fields displays information about the

current firmware.

Current Firmware Date:

This fields displays the date of the current

firmware.

Select File:

Click

Browse

to locate the firmware file

required.

Clear Config:

Check

Clear Config

to reset all current con-

figurations before the firmware is installed.

Update Firmware:

Click

Update Firmware

to upload and install

the selected firmware.

You can upgrade the firmware of the access point here. Make

sure the firmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the firmware file to be

used for the update. Please check the D-Link support website

for firmware updates at

http://support.dlink.com

. You can

download firmware upgrades to your hard drive from this site.

Summary of Contents for GO-DSL-AC750




































































































































Search results

Summary of Contents for GO-DSL-AC750

Reviews:

Brands by name

Popular brands

D-Link GO-DSL-AC750, User Manual

Search results

Summary of Contents for GO-DSL-AC750

Reviews:

Brands by name

Popular brands