manualshive.com logo in svg

D-Link GO-DSL-AC750, User Manual

Share
Download
D-Link GO-DSL-AC750 User Manual Download Page 33

28

D-Link Wireless AC Dual-Band ADSL Router User Manual

Section 3 - Configuration

Enable DHCP Relay:

You can choose Disabled, Enabled or Relay. If 

set to DHCP Server, the router can assign IP

addresses, IP default gateway and DNS Serv-

ers to the host under Windows95, Windows 

NT and other operation systems that support 

the DHCP client.

Relay IP Address:

Enter the desired DHCP relay IP address.

Enable DHCP Server:

Enable or disable the DHCP server function.

DHCP IP Address Range:

Enter the range of IP addresses the DHCP 

server can issue from.

DHCP Lease Time:

The lease time determines the period that 

the host retains the assigned IP addresses 

before the IP addresses change. The default is 

259200 seconds.

Enable DNS Relay:

If disabled the router will accept the first 

received DNS assignment from one of the 

PPPoA, PPPoE or MER enabled PVC(s) during 

the initial connection setup. If enabled you 

can enter the IP addresses for primary and 

secondary DNS servers.

Preferred DNS Server:

Enter an address for a preferred DNS Server.

Alternate DNS Server:

Enter an address for an alternate DNS Server.

DHCP Client Class List:

Client-class processing enables the DHCP 

server to assign the client an address from a 

matching scope.

DHCP Conditional Option:

Specify the conditions for DHCP class han-

dling.

DHCP Reservations List:

Use this option to reserve specific IP Ad-

dresses.

Number of Dynamic DHCP 

clients:

Dynamic DHCP clients will be listed here with 

supporting information.

Summary of Contents for GO-DSL-AC750




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands