D-Link EBR-2310 - EN Broadband Router User Manual Download Page 60

Page: 60 / 103

D-Link EBR-2310 User Manual

Section 3 - Configuration

Click on

Check Online Now for Latest Firmware Version

to find out

if there is an updated firmware; if so, download the new firmware to

your hard drive.

After you have downloaded the new firmware, click

Browse

to locate

the firmware update on your hard drive. Click

Upload

to complete

the firmware upgrade.

Check

Automatically Check Online for Latest Firmware Version

have the router check automatically to see if there is a new firmware

upgrade.

Firmware

Upgrade:

Browse:

Notifications

Options:

Update Firmware

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can

download firmware upgrades to your hard drive from the D-Link support site.

Summary of Contents for EBR-2310 - EN Broadband Router








































































































Search results

Summary of Contents for EBR-2310 - EN Broadband Router

Reviews:

Related manuals for EBR-2310 - EN Broadband Router

Brands by name

Popular brands

D-Link EBR-2310 - EN Broadband Router, User Manual

Search results

Summary of Contents for EBR-2310 - EN Broadband Router

Reviews:

Related manuals for EBR-2310 - EN Broadband Router

Brands by name

Popular brands