55
D-Link EBR-2310 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
Enter the new password for the User login. If you login as the User, you
can only see the settings, but cannot change them.
Enter a name for the EBR-2310 router.
Remote management allows the EBR-2310 to be configured from the
Internet by a web browser. A username and password is still required to
access the Web-Management interface. In general, only a member of your
network can browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator tasks from the
remote (Internet) host.
The port number used to access the EBR-2310.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the
EBR-2310 and 8080 is the port used for the Web Management interface.
Admin Password:
User Password:
Gateway Name:
Remote
Management:
Remote Admin
Port:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
