D-Link DXS-3227 - xStack Switch - Stackable, Cli Manual

Page: 268 / 466

RMON Commands
Page 267
show rmon events
The show rmon events User EXEC mode command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
The following table describes significant fields shown above:
Console> show rmon events
Index Description Type Community Owner Last time sent
----- -------------- -------- --------- ------- --------------------
1 Errors Log CLI Jan 18 2002 23:58:17
2 High Broadcast Log-Trap device Manager Jan 18 2002 23:59:48
F i e l d D e s c r i p t i o n
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the following
values:
none , log , trap , log-trap . In the case of log, an entry is made in the log table for
each event. In the case of trap, an SNMP trap is sent to one or more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this octet
string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any events, this
value is zero.