D-Link DXS-3227 - xStack Switch - Stackable Cli Manual Download Page 13

Page: 13 / 466

D-Link CLI Reference Guide

Page 12

Section 1. Using the CLI

Overview

This document describes the Command Line Interface (CLI) used to manage the D-Link family of managed
devices. This family includes:

DXS-3250

– Stackabel device with 48-port 10/100/1000BASE-T, 4 FSP ports, one Infiniband port and a 10G port.

DXS-3227P

– Stackabel Power over Ethernet device with 24-port 10/100/1000BASE-T, with one XFP fixed port and

two 10G ports.

DXS-3227

– Stackabel device with 24-port 10/100/1000BASE-T, with one XFP fixed port and two 10G ports.

The DXS-3250, DXS-3227P and DXS-3227 can operate as standalone systems, or can be stacked together in the
same system.

Most of the CLI commands are applicable to all devices.

This chapter describes how to start using the CLI and the CLI command editing features.

Summary of Contents for DXS-3227 - xStack Switch - Stackable


















































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3227 - xStack Switch - Stackable

Reviews:

Brands by name

Popular brands

D-Link DXS-3227 - xStack Switch - Stackable, Cli Manual

Search results

Summary of Contents for DXS-3227 - xStack Switch - Stackable

Reviews:

Brands by name

Popular brands