D-Link DWR-M961 User Manual Download Page 74

Page: 74 / 75

5.4.6

Upgrade

5.4.6.1. Firmware Upgrade

You install new version of the router’s software using this page. From time to time, we may release new versions

of the Router's firmware. Firmware updates contain improvements and fixes the current problems. On this page,

you can check the firmware version and upgrade firmware.

Figure 5-4-10 Upgrade

DO NOT

turns off the power or press the Reset button when updating the firmware.

Otherwise, the router may be damaged.

5.4.6.2. LTE Fota Upgrade

This page allows you upgrade the Mobile module firmware to new version. Please note, do not power off the

device during the upload because it may crash the system.

Figure 5-4-11 Fota Upgrade

DO NOT

turns off the power or press the Reset button when updating the lte

firmware. Otherwise, the lte module may be damaged.

Summary of Contents for DWR-M961












































































Search results

Summary of Contents for DWR-M961

Reviews:

Related manuals for DWR-M961

Brands by name

Popular brands

D-Link DWR-M961, User Manual

Search results

Summary of Contents for DWR-M961

Reviews:

Related manuals for DWR-M961

Brands by name

Popular brands