D-Link DWR-M961 User Manual Download Page 50

Page: 50 / 75

User Manual of DWR-M961

-50-

5.2.5

LAN

5.2.5.1. IPv4

This page is used to configure the parameters for local area network which connects to the LAN port of your Access
Point. Here you may change the setting for IP address, subnet, DHCP, etc.

Figure 5-2-22 LAN IPv4

Object

Description

LAN IP Address

Router’s LAN IP.

The default is

192.168.0.1

. You can change it according to your

needs.

Subnet Mask

Router’s LAN subnet mask.

WORK MODE

If it is selected, the router serves as the DHCP server and

automatically assigns IP addresses to all computers in the LAN.

DHCP Client Range

Enter the start and end IP address of all the available successive
IPs.

Lease Time

Select the time for using one assigned IP from the dropdown list.

After the lease time, the AP automatically assigns new IP

addresses to all connected computers.

Summary of Contents for DWR-M961












































































Search results

Summary of Contents for DWR-M961

Reviews:

Related manuals for DWR-M961

Brands by name

Popular brands

D-Link DWR-M961, User Manual

Search results

Summary of Contents for DWR-M961

Reviews:

Related manuals for DWR-M961

Brands by name

Popular brands