19
D-Link DWR-116 User Manual
Section 3 - Configuration
PPTP
Choose this Internet connection if your ISP provides you PPTP
account.
Choose Static IP only if your ISP assigns you an
IP address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dial-up.
Password that your ISP provides to you for PPTP dial-up.
Fill in with the same password in Password field.
Choose
Always-on
when you want to establish PPTP connection all the time. If you choose
Connect-on-demand
,
.
the device
will establish PPTP connection when local users want to surf the Internet, and disconnect if there is no traffic after the time
period set under Maximum Idle Time.
The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature.
Click
Save.Settings
to save your changes, or click
Don’t.Save.Settings
to discard your changes.
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway
IP Address:
PPTP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect
Mode:
Maximum Idle
Time:
